for pressure water-tight bonding
article number 040030
For water-impermeable bonding of fibre cement distance tubes
Add to notice listThe most important information at a glance
polymer
20 minutes at around 23°C
pasty
pressure water tightness (MFPA Leipzig)
fire resistance (MFPA Leipzig)
800 g foil bag
dry, non-lip, dust-free
free from separating substances as grease, oil, etc.
best before 9 months after production
Frost susceptible.
PROTECT Easy 1K is supplied in a complete set ready for application. It is suitable for bonding of all common fibre cement distance tubes with fibre cement plugs.
Remove loose particles inside the distance tubes and clean the inside using the cleaning brush.
Clean the distance tube from dust.
PROTECT Easy 1K is immediately ready for use. Open the bag.
Press the quantity required for bonding into the procssing cup.
The aluminium bag can easily be resealed using the clip.
Dip the fibre cement plug into PROTECT Easy 1K. The amount of material applied must be sufficient to enable full-faced bonding of the sides of the plug with the inside of the distance tube.
Push the first plug slightly further inside the distance tube to be bonded.
Apply the same amount of PROTECT Easy 1K onto a second plug and push it into the distance tube as well. This second plug will push both plugs into their desired final positions.
Finally smooth off the surface with your finger.
This serves to achieve both a visually appealing surface and a surface completely sealed and waterproofed with PROTECT Easy 1K.
Status: 23.03.2022
Similar products
You can find similar products here.
Solvent-free epoxy-based concrete adhesive. For pressure water-tight sealing of fibre cement distance tubes. 1 kg combination ca...
Screwed sealing of formwork tie points - maximum safety with superb appearance ...
Inner seals for plastic and fibre cement distance tubes ...
Contact us
We are happy to answer your questions