dalla bentonite di sodio
numero di articolo 010017
Nastri ad espansione bentonite
Descrizione del prodotto
I nastri bentonitici MASTERSTOP, collaudati da anni nella pratica edilizia, si gonfiano a contatto con l'acqua e sigillano le fessure o i giunti di costruzione in modo sicuro e duraturo.
I vantaggi dei nastri bentonitici MASTERSTOP sono convincenti
- Installazione facile e sicura
- Nessuna parte stampata e nessuna saldatura
- Nessun supporto
- Il processo di rigonfiamento e contrazione è reversibile
- Effetto auto-iniettante Dimensionalmente stabile e non appiccicoso
- I nastri rigonfianti penetrano in fessure e cavità
- Nessuno scarto o pezzo residuo
- Compatibile con l'ambiente
- Sicuro grazie a test approfonditi
Le informazioni più importanti in un colpo d'occhio
Bentonite di sodio con contenuto di gomma
Liscio
plastica
Fino al 240% in acqua normale (PH 7)
fino al 120 % in liquidi con forte attacco di cemento
fino al 220 % in liquidi alcalini
No
Ja
Per esempio
Liscivie in generale
Urea
Letame liquido e liquami
Biogas
Radon
Sale antighiaccio
Sostanze provenienti da fermentazione
Sostanze provenienti dal compostaggio
Acque reflue in impianti di trattamento delle acque reflue
Altre resistenze su richiesta
Dimensioni 20 x 10 mm
Cartone 54 m
9 rotoli da 6 m ciascuno
36 scatole per pallet
Installation with swelling tape adhesive:
The substrate must be clean, dry, and free of loose particles.
Apply the swelling tape adhesive in the centre of the joint in a uniform bead (width 8-10 mm) out of the cartridge onto the surface.
The subsequent concrete covering must be at least 8 cm on all sides.
Once the swelling tape adhesive has been applied in the centre of the joint, the MASTERSTOP bentonite swelling tape is placed on the adhesive and gently pressed on, moving it slightly back and forth, crosswise to the longitudinal axis.
When the tape is fixed, the adhesive should slightly ooze out on both sides.
This guarantees a complete fixation.
Ready for use after 4 – 6 hours (depending on weather conditions)
Installation with swelling tape grid:
The substrate must be clean, dry, and free of loose particles.
Place the MASTERSTOP bentonite swelling tape in the centre of the joint.
The subsequent concrete covering should be at least 8 cm on all sides.
Position the swelling tape correctly.
Push the fixing grid firmly onto the MASTERSTOP bentonite swelling tape.
Fasten using corresponding nails and either by hand or mechanically using a bolt-firing tool.
The distance between nails must not exceed 20 cm in the longitudinal direction of the swelling tape.
Both, straight and angle joints need to be butt jointed.
The joint areas must be form-fit in order to avoid any discontinuity in the system.
In the case of butt joints in the straight line and the use of swelling tape grids, the joints of swelling tape and swelling tape grid should be offset.
Status: 23.03.2022
Accessori
accessori adatti
Sigillante monocomponente, privo di solventi, per l'incollaggio dei nastri rigonfianti bentonitici MASTERSTOP. Consumo: 40 -...
Prodotti simili
Potete trovare prodotti simili qui.
Questo è un test...
Contattateci
Siamo lieti di rispondere alle vostre domande