Per le battute d'acqua in metallo di larghezza fino a 150 mm
numero di articolo 070196
Connettore per lamiere di giunzione/nastro di giunzione
Il connettore MASTER-Connect per waterstop in metallo F150 è un modo semplice, rapido e sicuro per unire due waterstop in metallo non rivestito in loco a tenuta d'acqua. Non è necessario saldare le lamiere per creare un collegamento a tenuta d'acqua in pressione.
Aggiungi all'elenco degli avvisiLe informazioni più importanti in un colpo d'occhio
Lastre di acciaio: St 37, brillanti
Piastre intermedie: NBR
Viti: zincate
150 mm
100 mm
ca. 6 mm / 6 mm
2,00 kg
Relazione d'inchiesta
UB 5.1 / 13-347
MFPA Lipsia
Fino a 7 bar ( 70 m di colonna d'acqua )
Liquame e letame liquido
Mash di fermentazione
Acidi e alcali diluiti
1 confezione/cartone
2 pezzi piastre in acciaio, St 37, lucido
2 piastre intermedie, NBR
4 rondelle, NBR
2 viti M 10, zincate
2 dadi M 10, zincati
L'arresto dell'acqua in metallo MASTER-Connect F150 viene fornito preassemblato e pronto all'uso
No
Ja
Remove the pre-assembled MASTER-Connect joint sheet metal from its box and erect vertically at its intended installation side.
Insert the sheet metal into the MASTER-Connect joint sheet metal from the left and right.
The sheet metal must be pushed between the two NBR plates until it is touching the bolts.
Use a torque wrench to tighten the bolts to 8 Nm torque.
Status: 23.03.2022
Prodotti simili
Potete trovare prodotti simili qui.
Il MASTER-Connect "attivo" MMF 140 è un modo semplice, rapido e sicuro per collegare le estremità MASTER MultiFlex tra lor...
Contattateci
Siamo lieti di rispondere alle vostre domande