Pasta pęczniejąca na bazie poliuretanu
numer artykułu 010030
Pasta pęczniejąca na bazie poliuretanu, do uszczelniania połączeń konstrukcyjnych i przepustów, kartusz 310 ml
Dodaj do listy powiadomieńNajważniejsze informacje w skrócie
Guma poliuretanowa
smaczne, stabilne
ok. 360 ml/m spoiny konstrukcyjnej
ok. 80 - 100 ml/m penetracji
approx. 6 - 7 mm / 24 hrs. at + 20 °C
Około 180%
20 +/-5
Połączenia robocze:
Świadectwo badań ogólnego nadzoru budowlanego
P-SAC 02 / 5.1/ 17 -310 (MFPA Leipzig)
Penetracje:
Raport z testów
PB 5.1 / 17-315-1 (MFPA Lipsk)
12 wkładów po 310 ml / pudełko
Beton, stal, kamień, sztywne PVC i wiele innych
!
!!! Nie nadaje się do polipropylenu !!!
Do suchych i wilgotnych podłoży
min. 9 miesięcy po wyprodukowaniu
2 pręty dla połączeń konstrukcyjnych
Preparatory work:
Cutting the cartridge tips:
The use of MasterMastic PU swelling paste for construction joints or wall penetrations requires different quantities of applied material.
The area of applied material is regulated by the discharge aperture.
The nozzle is cut off to suit the various areas of application.
The following aperture sizes are necessary:
Ø 5-6 mm: Adhesive joints, e.g. swelling tapes
Ø 8-10 mm: Penetrations
Ø 13-15 mm: Construction joints
The combination of the discharge aperture and the usage volume which you can find in the technical datasheet results in the required area of application in order to guarantee professional sealing.
Sealing of penetrations:
MasterMastic PU is applied before installation of the penetration into the formwork.
The installation of the penetration into the formwork starts after complete curing of the MasterMastic PU swelling paste.
It must be ensured that the bead of MasterMastic PU is inside the two reinforcements with a concrete cover of 8 cm.
Since MasterMastic PU is a swelling paste it must be treated like a swelling tape and be protected from rain.
Sealing of construction joints:
After cutting off the nozzle to the necessary discharge aperture MasterMastic PU can be applied to the clean substrate.
Apply MasterMastic PU with a consistent pressure and a consistent line speed.
The concreting of the building component can only start after complete curing of the MasterMastic PU.
It must be ensured that the bead of MasterMastic PU is inside the two reinforcements with a concrete cover of 8 cm.
Since MasterMastic PU is a swelling paste it must be treated like a swelling tape and be protected from rain.
Status: 23.03.2022
Skontaktuj się z nami
Chętnie odpowiemy na Twoje pytania