Gemaakt van hoogwaardig TPE
artikelnummer 010045
Voor het afdichten van constructievoegen en doorvoeren in betonconstructies
.Met een geteste drukbestendigheid van 8 bar voldoet FLOWSTOP aan de eisen van de Duitse WU-richtlijn voor een continue druk van 2 bar, evenals aan internationale normen die een hoge drukbestendigheid vereisen.
- Algemeen testcertificaat van de bouwautoriteit
- Geschikt voor wateruitwisselingszones
- Goede chemische bestendigheid
- Dimensionaal stabiel
- Maximale druk 8 bar met de afmeting 20 x 5 mm
- Langdurige tests van meer dan 250 dagen
- Makkelijke installatie met de POWER zwelbandlijm
- Geen opstaande rand nodig
De belangrijkste informatie in één oogopslag
Gewijzigd TPE
Soepel
40 - 50 Shore A DIN 53505-A
Tot 300% DIN 53571
tot 600 %, in normaal water (pH 7)
tot 100 %, in zout water
Algemeen bouwtoezicht testcertificaat (abP)
MFPA Leipzig
Nr: P-SAC 02 / 5.1 / 13-515
Europese technische beoordeling
ETA-18/0304
gedateerd 18 juni 2018
JGS test
MPA Braunschweig
(1200/442/15d)-Pan d.d. 28 oktober 2015
Ja
Gebruiksklasse A voor belastingsklasse 1 en 2 volgens de WU-richtlijn
Bijvoorbeeld
Verdunde zuren en logen
Zeewater
Methaangas
Radon
Alkaliteit van beton
Minerale oliën
Brandstoffen (benzine, diesel, paraffine)
Karton á 60 m
6 rollen van elk 10 m
36 dozen per pallet
Only the system-compatible POWER swelling tape adhesive is suitable for installation.
FLOWSTOP High-pressure swelling tape must not be installed using swellingtape grid!
The substrate must be clean, dry, and free ofloose particles. Apply the POWER swelling tape adhesive in a uniform bead (width 8-10 mm) out of the cartrige onto the surface.
Once the POWER swelling tape adhesive has been applied in the centre of the joint, the FLOWSTOP High-pressure swelling tape is placed on the adhesive and gently pressed on, moving it slightly back and forth, crosswise to the longitudinal axis. When the tape is fixed, the adhesive should slightly ooze out on both sides. This guarantees a complete fixation.
A concrete cover of 8cm must be ensured. FLOWSTOP High-pressure swelling tape must always be installed inside a two-sided connection reinforcement.
Both, straight and angle joints need to be butt jointed. The joint areas must be form-fit in order to avoid any discontinuity in the system.
Angle joint
Straight butt joint
Status: 23.03.2022
Accessoires
passende accessoires
Eencomponent, oplosmiddelvrije kit voor het lijmen van MASTERSTOP en FLOWSTOP zwelbanden. De POWER versie is een hogedruklijm. ...
Contact us
We beantwoorden graag je vragen